PCFP-100G-SR10C 100GBASE-SR10 10x850nm 300m OM3 CFP Optical Transceiver ,100Gbps CFP 365bet赔率怎么看_365bet娱乐场官网_365bet娱乐场官网备用
Home??>??日博代理??>??Optical Tranceivers??>??100Gbps Optical Module??>??100Gbps CFP??>??PCFP-100G-SR10C 100GBASE-SR10 10x850nm 300m OM3 CFP Optical Transceiver

PCFP-100G-SR10C 100GBASE-SR10 10x850nm 300m OM3 CFP Optical Transceiver

100G CFP 10x850nm  MPO  300m DDM
100G CFP 10x850nm  MPO  300m DDM
prev
  • 100G CFP 10x850nm  MPO  300m DDM
  • CFP-LF4
  • CFP-LF4
next
  • PCFP-100G-SR10C 100GBASE-SR10 10x850nm 300m OM3 CFP Optical Transceiver
  • Introduction: Form Factor:CFP
    Data Rate:100Gbps
    Wavelength:10x850nm MMF
    Connector:MPO
    Distance1:?300m on OM3 ?
    Distance2:?400m on OM4
    Diagnostics: With DDM
  • Inquire Online
Key Features
Features
? Compliant to the CFP Hardware Specification Version 1.4
? Compliant to the CFP MSA Management Interface Specification Version 2.2
? Compliant to theIEEE 802.3ba(100GBASE-SR10)
? Transmission data rate up to 11.18 Gbit/s per channel
? Up to 300m on OM3 and 400m on OM4 MMF
? Power class 1 (<8W max)
? OTU4 compatible
? 10 channels 850nm VCSEL array transmitter
? 10 channels PIN photo detector array receiver
? MDIO digital diagnostic interface and control capabilities.
? TX input and RX output CDR retiming
? Hot pluggable electrical interface
? Operating case temperature:0°C~ +70°C
? Single 3.3V power supply
? RoHS 6 compliant(lead free)
? Utilizes a standard 24/20 lane optical fiber with MPO connector

Applications
? 100GBE interconnects
? High-speed core router connections & Datacom/Telecom switch
? Data aggregation and backplane applications
? Proprietary protocol and density application

Description
The CFP optical transceiver module are a high performance, low power consumption, short reach(1m to 100m) interconnect solution supporting 100G Ethernet and Telecom. It is compliant with the CFP MSA and IEEE P802.3ba 100GBASE-SR10. Pronets CFP SR10 modules offer 10 transmit and 10 receive asynchronous channels operating at up to 11.18Gbps per channel.
日博代理 As shown in Figure 1, the transmitter side of the module consists of an array of VCSELs (Vertical Cavity?Surface Emitting Lasers) and associated circuitry, which converts 10 parallel electrical data inputs to 10 parallel optical data output signals and also converts 10 parallel optical signals into 10 parallel electrical signals through an array of PIN photodiodes and associated circuitry. The refclk clock of 161.1328M for 100GE(or 174.6875M for OTU4) is necessary for our module(Optional).

Comments/messages

  • Submit
Contact us

skype

skype